samfurori
XDB102-3 Diffused Silicon Pressure Sensor
Siffofin
● Daidaiton CE.
● Rage: -100kPa…0kPa~20kPa…3.5MPa.
● guntu da aka shigo da shi, Laser trimming.
● Samar da OEM, gyare-gyare mai sauƙi.
φ19mm×5.55mm.
Aikace-aikace na yau da kullun
● Gudanar da tsarin masana'antu.
● Ganewar iskar gas, ruwa da tururi.
● Auna matakin.
Ma'aunin Fasaha
| Yanayin tsari | ||||
| Abun diaphragm | Saukewa: SS316L | Kayan gida | Saukewa: SS316L | |
| Pin waya | Zinare-plated karaf / 100mm silicone roba waya | Bututun matsa lamba na baya | SS 316L (ma'auni da matsa lamba kawai) | |
| Zoben hatimi | Nitrile roba | |||
| Yanayin lantarki | ||||
| Tushen wutan lantarki | ≤2.0mA DC | Shigar da impedance | 2.5k ~ 5 kΩ | |
| Fitowar impedance | 2.5k ~ 5 kΩ | Martani | (10% ~ 90%): <1ms | |
| Juriya na rufi | 100MΩ, 100V DC | Yawan matsa lamba | 2 sau FS, (0C/0B/0A/02 sau 5 FS) | |
| Yanayin muhalli | ||||
| Aiwatar da kafofin watsa labarai | Ruwan da ba shi da lahani ga bakin karfe da roba nitrile | Girgiza kai | Babu canji a 10gRMS, (20 ~ 2000) Hz | |
| Tasiri | 100 g, 11 ms | Matsayi | Juya 90° daga kowace hanya, canjin sifili ≤ ± 0.05% FS | |
| Halin asali | ||||
| Yanayin yanayi | (25± 1) ℃ | Danshi | (50% ± 10%) RH | |
| Matsin yanayi | (86-106) kPa | Tushen wutan lantarki | (1.5 ± 0.0015) mA DC | |
| Duk gwaje-gwajen sun yi daidai da ƙa'idodin ƙasa masu dacewa, gami da GB / T2423-2008, GB / T8170-2008, GJB150.17A-2009, da sauransu, kuma sun bi ka'idodin "Matsayin Sensor Enterprise Standards" na Kamfanin na abubuwan da suka dace. | ||||
Bayanan oda
1. Don kauce wa rashin daidaituwa na firikwensin, don Allah kula da girman shigarwa da tsarin shigarwa don kauce wa danna gaban firikwensin a cikin 3 seconds don kauce wa canja wurin zafi zuwa firikwensin.
2. Lokacin amfani da fil ɗin cotter mai launin zinari akan waya, da fatan za a yi amfani da ƙarfe mai siyar da ƙasa 25W ƙarƙashin ƙarancin zafin jiki.
Bayanin oda
| Saukewa: XDB102-3 |
| |||||
|
| Lambar kewayon | Kewayon aunawa | Nau'in matsi | Lambar kewayon | Kewayon aunawa | Nau'in matsi |
| 0B | 0-20kPa | G | 08 | 0 ~ 350kPa | G/A | |
| 0A | 0 ~ 35kPa | G | 09 | 0-700kPa | G/A | |
| 02 | 0-70kPa | G | 10 | 0 ~ 1 MPa | G/A | |
| 03 | 0 ~ 100kPa | G/A | 12 | 0 ~ 2MPa | G/A | |
| 07 | 0 ~ 200kPa | G/A | 13 | 0 ~ 3.5MPa | G/A | |
|
| Lambar | Nau'in matsi | ||||
| G | Ma'aunin ma'auni | |||||
| A | Cikakken matsin lamba | |||||
|
| Lambar | Haɗin lantarki | ||||
| 1 | Kovar fil mai launin zinari | |||||
| 2 | 100mm Silicone roba gubar | |||||
|
| Lambar | Ma'auni na musamman | ||||
| Y | Ana iya amfani da nau'in ma'auni don auna matsi mara kyau① | |||||
| XDB102-3 -0B-G-1-Y cikakken bayani② | ||||||
Bayanan kula
1. Don kauce wa rashin daidaituwa na firikwensin, don Allah kula da girman shigarwa da tsarin shigarwa don kauce wa danna gaban firikwensin a cikin 3 seconds don kauce wa canja wurin zafi zuwa firikwensin.
2. Lokacin amfani da fil ɗin cotter mai launin zinari akan waya, da fatan za a yi amfani da ƙarfe mai siyar da ƙasa 25W ƙarƙashin ƙarancin zafin jiki.
